This vacuum chambers are mainly made of 304 stainless steel and plexiglass, with a wall thickness of 3mm, Equipped with glass window, side-opening door, vacuum pressure gauge, air inlet valve, air outlet valve, reinforced box body. It can pump negative pressure without deformation or leakage. It is usually used in liquid defoaming, vacuum coating, vacuum cladding, etc.
Send Your Inquiry Now
Vacuum Chambers' Model for Choose
Model
Size（L*W*H）
Material
Vacuum degree
Thickness
Z400
400*400*400mm
SUS 304
-0.1MPA
3mm
Z600
600*600*600mm
SUS 304
-0.1MPA
3mm
Z800
800*800*800mm
SUS 304
-0.1MPA
3mm
Customized
Any size
SUS 304
-0.1MPA
3mm
The main components of the vacuum box can be seen from the picture on the left. In addition to these components, we can also add circuit strips and various sensors to the vacuum box to detect the status inside the vacuum box.
Vacuum chambers are employed across various research and manufacturing processes, such as leak testing, stress testing, semiconductor failure analysis, degassing, drying, distillation, permeability testing, coating, specific gravity measurement, atmospheric simulations, and the storage of inert gases.
Vacuum box door opening The side box door opening design allows for storing larger objects and materials.
Vacuum pressure gauge The box is equipped with a vacuum pressure gauge to facilitate observing pressure changes when vacuuming
Aviation socket A socket is standardly equipped in the box for convenient use of electricity.
Reserved interface A KF40 and a KF25 interface are reserved on the back of the vacuum box
Reinforcement rib design When the box is vacuumed, the reinforcement ribs are strengthened to prevent vacuum deformation
Inlet ball valve Insert ball valve on the side of the box can also be used for gas replacement
Ball outlet valve The valve that allows gas to exit the box when replacing gas.
