Stainless Steel Glove Box

The box of this glovebox is made of stainless steel plate, and the outside of the glove box is reinforced with ribs. The box can withstand vacuum pressure. The stainless steel gloves box is equipped with two valves, an air inlet valve and an exhaust valve. The exhaust valve is connected to the vacuum pump to remove the air in the stainless steel vacuum glove box. The air inlet valve can be supplemented with inert gas, and the lowest water oxygen value inside the glove box can reach 300ppm. For material transfer needs, you can choose this glove box with a transition chamber. The vacuum pump and bottom bracket are optional.

Send Your Inquiry Now

Stainless Steel Glove Boxes With Transfer Chamber

Main components of Stainless Steel Glove Boxes

Box: The glove box used SUS304 stainless steel, 3mm thickness, inner surface: stainless steel wire drawing, outer surface: spray paint, self-color
Window: The operating box is 10mm thick plexiglass on the front, with a wide viewing angle without blind spots
Ball valve: The inlet and outlet ball valves are made of 304 stainless steel. The valves are equipped with water nozzles inside and outside for water and air intake. Some instruments (such as spin coaters) can be placed in the box and vacuumed through them
Lighting: UV-free white light, installed above each glass window
Power supply: The box is equipped with multi-hole power sockets to meet the needs of customers' internal instrument use
Gloves: The operating box uses industrial-grade corrosion-resistant latex gloves, and the glove openings are fixed with sealing rings
Reserved interface: Reserved KF interface, the glove box can be upgraded or connected to instruments and equipment at any time in the future

Stainless Steel Glove Box Size Optional

Model	GBV600-C	GBV800-C	GBV1200-C
Material	SUS304/316	SUS304/316	SUS304/316
Working Chamber Size	600W450D450H	800W650D680H	1120W750D900H
Transition Chamber Size	φ280&240L	φ280&280L	φ370&400L
Door Structure(Optional)	Manual door	Semi-automatic door	Semi-automatic door
Optional (Side door)	W240*H280mm	W330*H380mm	W380*H480mm
Mobile stand	Optional	Optional	Optional

Function Optional

Fully automatic humidity system	Fully automatic control of humidity/moisture in the box, out of the blind spot of humidity
Fully automatic pressure system	The box is at a constant pressure value, especially suitable for the leakage of harmful powder
Oven	If vacuum baking is required, the transition chamber heating mode can be selected
Gas replacement system	After vacuuming and filling with inert gas, the water oxygen value is generally around 200PPM
Purification system	It can achieve a water oxygen value <1PPM
Dust removal system	If the internal purification level reaches 100/1000, the dust removal system can be selected

Strong acid and alkali resistant, easy to clean
The box is made of 3mm thick stainless steel, which can withstand strong acids and alkalis and is not easy to rust.
Vacuum transition chamber
It can be vacuumed, and the vacuum degree reaches -0.1MPA.
Large side door
The size of the side door can be customized as you like, which is convenient for placing larger experimental instruments.
Butyl acid and alkali resistant gloves
The vacuum glove cover (closed when vacuuming) comes with a set of butyl gloves.
Visual window
Using 12mm thick tempered glass, it is convenient to observe the experimental process.
Built-in LED lighting in the box
The glove box is equipped with a lighting device to facilitate experimental operation.
Inlet and outlet valves
Inlet and outlet ball valves, connected to the air pipe to replace the gas before the experiment.
Vacuum pressure gauge
Used to observe the vacuum degree of the transition chamber.
Built-in socket
Convenient for electrical operation during the experiment.

Why Choose Us?

Good sealing
The glove box is laser welded throughout, this technology can significantly reduce the connection gap

Low Water and Low Oxygen
Water oxygen value can reach 0.1ppm (can be achieved after adding purification system)

Customization supported

The Glove Boxes can be desgined as your requirements, including material function etc.

Lifetime maintenance

After purchase, the manufacturer can provide lifelong technical guidance and product repair services

Vacuumable
The vacuum glove box, vacuum degree up to -0.1MPA

Corrosion-Resistant
Easy to clean (made of 3mm thick SUS304 stainless steel)

Warranty
3-year warranty (gloves and other consumables are not covered by the warranty)

Positive Customer Feedback
Our clients consistently praise our glove boxes for their reliability and effectiveness, reflecting our commitment to excellence and customer satisfaction.

Stainless Steel Glove Box

Main components of Stainless Steel Glove Boxes

Stainless Steel Glove Box Size Optional

Function Optional

Why Choose Us?

Our Clients

Jinan Kubotech co.,Ltd.

Products